View ENWC9A0XXXEF_1575697.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

classification einstufung product specific a t ion produktspezifikation no. ds-4555-24 00-102 rev. a subject thema modem for ieee802. 15.4 (zigbee) ?zigbee? mo dem? (ieee802.15.4) page seite 1 of 26 cust o me r?s code pan4555 pana s oni c ?s code enwc9a0 x xxef date datum 26.04.2007 high f r equency products di vision module business pana s oni c elect r onic devi ces europe gmbh approve d genehmigt chec ked geprft designe d erstellt application for production panasonic electronic devices europe gmbh zeppelinstrasse 19 21337 lneb u rg applicant / manufacturer hardware germany freescale semiconductor inc. applicant / manufacturer software contents approval for mass production customer by signing this docume n t, customer accepts th e validity of the below-mentioned co ntents and declares his full notice t o it. some passages ma y be changed if required; the validity shall not be affected ther eby. checked / approved: d a t e : n a m e : s i g n a t u r e : note: at least one set of approved spec ifications shoul d be ret urned t o the address of the issuing party.
classification einstufung product specific a t ion produktspezifikation no. ds-4555-24 00-102 rev. a subject thema modem for ieee802. 15.4 (zigbee) ?zigbee? mo dem? (ieee802.15.4) page seite 2 of 26 cust o me r?s code pan4555 pana s oni c ?s code enwc9a0 x xxef date datum 26.04.2007 high f r equency products di vision module business pana s oni c elect r onic devi ces europe gmbh approve d genehmigt chec ked geprft designe d erstellt tabl e of content s 1. key feature s ................................................................................................................... 4 2. applications for the module ............................................................................................. 4 3. description of the module ................................................................................................ 5 4. scope of this document .................................................................................................. 5 5. history for this document ................................................................................................ 5 6. terminal layout ............................................................................................................... 6 7. block diagr am ................................................................................................................. 8 8. key parts list ................................................................................................................. .8 9. test conditions ............................................................................................................... 8 10. absolute maximu m ratin g s ............................................................................................. 9 11. operating conditions ....................................................................................................... 9 12. dc electrical characteristics ......................................................................................... 10 13. a/d convert e r characteristics ........................................................................................ 10 14. ac electrical characteristics ......................................................................................... 11 15. soldering t e mperature-time profile (for reflow soldering) ........................................... 12 15.1. for lead solder ..................................................................................................... 12 15.2. for leadfree solder ............................................................................................... 12 16. module dimension ......................................................................................................... 13 17. foot print of the module ................................................................................................ 13 18. labeling drawing ........................................................................................................... 14 19. mechanical requiremen t s ............................................................................................. 14 20. recommen ded land pattern ........................................................................................ 15 21. developme n t of applica t ions with fr eescale bee s tack tm .............................................. 16 22. reliability t e sts ............................................................................................................. 1 7 23. cautions ....................................................................................................................... .1 7 23.1. notes of design .................................................................................................... 17 23.2. notes of inst allation .............................................................................................. 18 23.3. notes of usage conditio n s .................................................................................... 18 23.4. notes of sto r age ................................................................................................... 19 23.5. cautions for safety ............................................................................................... 19 23.6. other cautions ...................................................................................................... 19 24. packaging ...................................................................................................................... 21 24.1. tape dimen s ion ................................................................................................... 21 24.2. packing in t ape ................................................................................................... 21 24.3. component direction ............................................................................................ 22 24.4. reel dimen s ion .................................................................................................... 22 24.5. label for package ................................................................................................ 23 24.6. total packin g handling ........................................................................................ 23
classification einstufung product specific a t ion produktspezifikation no. ds-4555-24 00-102 rev. a subject thema modem for ieee802. 15.4 (zigbee) ?zigbee? mo dem? (ieee802.15.4) page seite 3 of 26 cust o me r?s code pan4555 pana s oni c ?s code enwc9a0 x xxef date datum 26.04.2007 high f r equency products di vision module business pana s oni c elect r onic devi ces europe gmbh approve d genehmigt chec ked geprft designe d erstellt 24.7. cover tape reel strength ...................................................................................... 24 25. ordering information ..................................................................................................... 24 26. rohs decla r ation .......................................................................................................... 25 27. data sheet status ......................................................................................................... 25 28. related documents ....................................................................................................... 25 29. general information ....................................................................................................... 26 30. life support policy ........................................................................................................ 26
classification einstufung product specific a t ion produktspezifikation no. ds-4555-24 00-102 rev. a subject thema modem for ieee802. 15.4 (zigbee) ?zigbee? mo dem? (ieee802.15.4) page seite 4 of 26 cust o me r?s code pan4555 pana s oni c ?s code enwc9a0 x xxef date datum 26.04.2007 high f r equency products di vision module business pana s oni c elect r onic devi ces europe gmbh approve d genehmigt chec ked geprft designe d erstellt 1. key feat ures schlsseleigenschaften ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
classification einstufung product specific a t ion produktspezifikation no. ds-4555-24 00-102 rev. a subject thema modem for ieee802. 15.4 (zigbee) ?zigbee? mo dem? (ieee802.15.4) page seite 5 of 26 cust o me r?s code pan4555 pana s oni c ?s code enwc9a0 x xxef date datum 26.04.2007 high f r equency products di vision module business pana s oni c elect r onic devi ces europe gmbh approve d genehmigt chec ked geprft designe d erstellt 3. des cript ion of the module beschreibung des moduls the pan45 55 module is a short ran ge, low power, 2.4 ghz ism band transceiver which includes a complete 802.15.4 physical layer (phy) mode m, designed for the ieee 802.15.4 wireless sta ndard and a appropriate microcontroller (mcu) with reference oscillator which provides a cost effective solution for short-range data links a nd networks. the main purpose of pan4555 are zigbee tm ( www.zigbee.org ) applications based o n ?beestack? of freescale inc.. for de tails on zigbee tm applica t ion softwar e see chapt er 21. proprietary networking solutions on top of the i eee802.15.4 mac/phy software package (available at www.freescale.com/zig bee ) could b e implement ed instead o f zigbee tm as well. as integrated development environment (ide) t he metrowerks tm codew arrior ide from www. metro w erks.com is required. for device flash progra mming via the bdm port of pan455 5 the usb hcs08/hcs12 multilink fro m www.pemicro.com is r e commende d. 4. scope of this document umfang dieses dokumentes this product specificatio n applies to the zigbee ready mode m enw c 9a0xxxe. the xxx is the indicator for different versions (refer to chapte r 25 ordering information). the used zigbee chip is the mc131 94 from the us compan y freescale www.freescale.com/zig bee diese produktionsunter lagen bezieh en sich auf das zigbee ready mode m enw c 9a0xxxe die zeichen xxx bezeichnen verschiedene versionen (erkl?rung im kapitel 25 ordering information). der verwen dete zigbee chip ist der mc13194 d e r us firma freescale. 5. history for this docume n t versionsverwaltung dieses dokumentes revision version date datum modific a tion / remarks ?nder un gen / bemerku nge n a 26.04.2 0 0 7 initial dr aft version
classification einstufung product specific a t ion produktspezifikation no. ds-4555-24 00-102 rev. a subject thema modem for ieee802. 15.4 (zigbee) ?zigbee? mo dem? (ieee802.15.4) page seite 6 of 26 cust o me r?s code pan4555 pana s oni c ?s code enwc9a0 x xxef date datum 26.04.2007 high f r equency products di vision module business pana s oni c elect r onic devi ces europe gmbh approve d genehmigt chec ked geprft designe d erstellt 6. terminal layout anschlu?belegung a n tenna 16.4 m m 12.2 mm 18 19 20 22 23 24 21 10 11 12 14 15 16 17 2 1 3 4 678 9 h e i ght 2.2 mm 5 t op v i ew 26 27 28 29 30 31 32 25 13 please refer also to the mc1321 x technical da ta sheet and r e ference manual, which is given in [2] and [3] in chapter related documents. pin no. pin name pin t y pe descripti on 1 g n d i / o g r o u n d 2 pt b0 / ad1p0 i/o mcu port b bit 0 / a t d analog channel 0 3 pt b1 / ad1p1 i/o mcu port b bit 1 / a t d analog channel 1 4 pt b2 / ad1p2 i/o mcu port b bit 2 / a t d analog channel 2 5 pt b7/ad1p7 i/o mcu port b bit 7 / a t d analog channel 7 6 vref h i mcu hig h refer ence vo ltag e for at d 7 pt a7 / kbi1p7 dig. i/o mcu port a bit 7 / key b oard i nput bit 7 8 pt a5 / kbi1p5 dig. i/o mcu port a bit 5 / key b oard i nput bit 5 9 g n d i / o g r o u n d 10 pt a6 / kbi1p6 dig. i/o mcu port a bit 6 / key b oard i nput bit 6 11 ptg0 / bkgn d / ms dig. i/o mcu port g bit 0 / background / mode selec t (1 ) 12 ptg1 / x t al dig. i/o / o mcu port g bit 1 / cry s tal os cillator output (2 ) 13 ptg2 / ex t a l dig. i/o / i mcu port g bit 2 / cry s tal os cillator input (2 ) 1 4 g n d i / o g r o u n d
classification einstufung product specific a t ion produktspezifikation no. ds-4555-24 00-102 rev. a subject thema modem for ieee802. 15.4 (zigbee) ?zigbee? mo dem? (ieee802.15.4) page seite 7 of 26 cust o me r?s code pan4555 pana s oni c ?s code enwc9a0 x xxef date datum 26.04.2007 high f r equency products di vision module business pana s oni c elect r onic devi ces europe gmbh approve d genehmigt chec ked geprft designe d erstellt pin no. pin name pin t y pe descripti on 15 pt c0 / t x d2 dig. i/o mcu port c bit 0 / sci2 t x data out 16 pt c1 / rx d2 dig. i/o mcu port c bit 1/ sci2 rx data in 1 7 g n d i / o g r o u n d 18 pt c5 dig. i/o mcu port c bit 5 19 pt c3 / scl1 dig. i/o mcu port c bit 1/ i i c bus clock 20 pt c2 / sda1 dig. i/o mcu port c bit 1/ i i c bus clock 21 pt e0 / t x d1 dig. i/o mcu port e bit 0 / sci1 t x data out 22 pt e1 / rx d1 dig. i/o mcu port e bit 1/ sci1 rx data in 23 vdda po w e r o modem a nal og regul ated su p p l y outp u t 24 vcc po w e r i modem vo ltag e regu lators? i n put 2 5 g n d i / o g r o u n d 26 vcc po w e r i modem vo ltag e regu lators? i n put 27 reset dig. i/o mcu reset. active lo w 28 pt d6 / t p m2ch3 dig. i/o mcu port d bit 6 / tpm2 channel 3 29 pt d4 / t p m2ch1 dig. i/o mcu port d bit 4 / tpm2 channel 1 30 pt d2 / t p m1ch2 dig. i/o mcu port d bit 2 / tpm1 channel 2 3 1 g n d i / o g r o u n d 3 2 e x ant i / o pin for e x terna l antenn a (50 : ) note: ( 1 ) pt g0 is ou tpu t on ly. pin is i/o w hen use d as bdm fu nc tion . (2 ) ful l i/ o wh en not u s ed a s cl o c k sou r ce. ple a s e ref e r al so to [ 2 ].
classification einstufung product specific a t ion produktspezifikation no. ds-4555-24 00-102 rev. a subject thema modem for ieee802. 15.4 (zigbee) ?zigbee? mo dem? (ieee802.15.4) page seite 8 of 26 cust o me r?s code pan4555 pana s oni c ?s code enwc9a0 x xxef date datum 26.04.2007 high f r equency products di vision module business pana s oni c elect r onic devi ces europe gmbh approve d genehmigt chec ked geprft designe d erstellt 7. block di agram blockdiagr amm sc i 1 kbi ti m e r / p w m a/ d b k g d 16m hz p r og r a m m i ng w a ke u p r e se t s c i 2 m c 132 1x r f t r anscei v er & c v cc s e ns or s a c tuator s se r i a l co m m u n i ca ti o n lo gi c i o s rx / tx m a t c hi ng net w o r k 8. key part s list liste der schlsselkomponenten part name t e ilenummer material material p.w . board leiterplatte glass cloth ep oxid e resin w i t h gol d pl ating fr4 mit goldauflage casing deckel material: bz n1 5-20, thickn ess 0.15mm material: w e i? blec h 0,15mm dicke ic part name ic name mc13 194 (free scale w w w . freescale.com/zigbee ) all inform ation are bas ed o n [2] chapter 2 8 9. test conditions me?bedingungen measureme n ts shall be made under room temp erat ure and humidity unless otherwise specified. messungen unter normalen bedingu ngen, abweichungen sin d gesondert notiert. temperature 25 10c humidity 40 to 85%rh temperatur 25 10c luftfeuchtig keit 40 to 85%rh
classification einstufung product specific a t ion produktspezifikation no. ds-4555-24 00-102 rev. a subject thema modem for ieee802. 15.4 (zigbee) ?zigbee? mo dem? (ieee802.15.4) page seite 9 of 26 cust o me r?s code pan4555 pana s oni c ?s code enwc9a0 x xxef date datum 26.04.2007 high f r equency products di vision module business pana s oni c elect r onic devi ces europe gmbh approve d genehmigt chec ked geprft designe d erstellt 10. absolut e maximum ratings absolute grenzwerte the maxi mu m ratings may not be exceeded und er any circumstances, n o t even mo mentarily and individu ally, as per manent damage to the module will re sult. no. item punkt sy m b o l z e iche n absolute max i mum ratings absolute grenzw erte unit einh eit 1 s u p p l y v o lta g e v cc -0.3 to +3.6 vdc 2 ripp l e o n v cc v c c rip 100 (ri ppl e freq uenc y ?
classification einstufung product specific a t ion produktspezifikation no. ds-4555-24 00-102 rev. a subject thema modem for ieee802. 15.4 (zigbee) ?zigbee? mo dem? (ieee802.15.4) page seite 10 of 26 cust o me r?s code pan4555 pana s oni c ?s code enwc9a0 x xxef date datum 26.04.2007 high f r equency products di vision module business pana s oni c elect r onic devi ces europe gmbh approve d genehmigt chec ked geprft designe d erstellt 12. dc elect r ical characteristics v cc = 2.7v, t amb = 25c if nothing el se stated no. item con d itio n / remark sy m b o l value unit min ty p max 1 t r ansmit current consumpti o n t r ansmit mode (1 ) i cct 3 0 3 5 m a 2 receiv e curre n t consumptio n receiv e mod e i ccr 3 7 4 2 m a off (2 ) i le a k a g e 0 . 2 1 . 0 a hiber nate (2 ) i cch 1 . 0 6 . 0 a doze (n o clk o ) (2 ) (3 ) i ccd 3 5 1 0 2 a 3 lo w p o w e r cur r ent consum ption i d l e i cci 5 0 0 8 0 0 a 4 digit a l i/o pin characteristics please re fer to [2] 6.3.1 m cu dc characteristics 5 digit a l i/o pin input capaci t a n c e a l l non-supply pins (4 ) c in 7 pf 6 lo w vo ltag e w a rni ng/det ectio n po w e r on reset re-arm voltage pleas e refer to [2] 6.3.1 mcu dc char acteri stics note s: (1 ) spi re gi st er 12 i s d e f a u l t val ue of 0x0 0 b c whi c h set s out p u t p o w er to no mi n a l val ue ( 2 ) t o a t ta in s pec ified low p o we r curr en t, a ll g p io a n d o t her digital io mus t b e han dled p r op er ly. deta il ed d e scri p ti on co ul d be f o un d at [ 2 ] at se cti o n 7.2 l o w po wer co n s i d e r at io n s . ( 3 ) cl ko freq uenc y a t de fau l t va lu e o f 3 2 . 7 8 6 khz . (4 ) thi s p a r a m et er i s ch a r a c t e ri ze d an d n o t te st e d o n ea ch dev i c e. 13. a/d conv erte r chara c te ristics no item remark 1 at d characteristics pleas e refer to [2] 6.3.3 mcu at d characteristics 2 at d timing/per formance character i stics pleas e refer to [2] 6.3.3 mcu at d characteristics the a/d high reference voltage vrefh is conne cted to pin 6 (vrefh) the a/d low reference voltage vrefl is interna lly connecte d to gnd.
classification einstufung product specific a t ion produktspezifikation no. ds-4555-24 00-102 rev. a subject thema modem for ieee802. 15.4 (zigbee) ?zigbee? mo dem? (ieee802.15.4) page seite 11 of 26 cust o me r?s code pan4555 pana s oni c ?s code enwc9a0 x xxef date datum 26.04.2007 high f r equency products di vision module business pana s oni c elect r onic devi ces europe gmbh approve d genehmigt chec ked geprft designe d erstellt 14. ac elect r ical characteristics v cc = 2.7v, t amb = 25c, 5 0 : load at exant, for all channel s nu mber 11,12,..., 26 according to [1] no receiv er limit unit nr empf?ng er min ty p max einh eit 1 sensitiv it y for 1 % packet error rate (per), -85dbm re quir ed b y > 1 @ - - 9 2 - 8 7 d b m 2 saturation (max i m u m input level) 0 10 - dbm 3 adjac ent ch an nel interfere n c e for 1% per ( r 5mhz; desir e d sign al -82 d b m) 0 2 9 - d b 4 alternate c h a n nel interfere n c e for 1% per ( r 10mhz; d e sir ed sig nal -8 2d bm) 0 4 0 - d b 5 f r eque nc y err o r t o lerance - - 200 khz 6 s y mb ol r a te error t o lerance - 80 ppm 7 in-ban d spur io us emissio n - tbd - dbm 8 spuri ous emis sions < 1 ghz - tbd -57 dbm 9 spuri ous emis sions > 1 ghz - tbd -47 dbm no t r ansmitter limit unit nr send er min ty p max einh eit 1 maximum output po w e r (1 ) - 3 . 0 0 . 0 - d b m 2 nominal output pow e r (2 ) - - 4 . 0 - d b m 3 minimum output po w e r - tbd - dbm 4 error vector magn itud e (evm) - 25 35 % 5 p o w e r c ontrol ran g e - 3 0 - d b 6 over the air data rate - 250 - kbps 7 2 nd harmonic @ maximum o u tput po w e r - -50 -30 dbm 8 3 rd harmo nic @ maximum o u tput po w e r - -60 -30 dbm 9 spuri ous emis sions < 1 ghz - < -40 -36 dbm 10 spuri ous emis sions > 1 ghz - < -40 -30 dbm no stand b y limit unit nr in bereitschaft min ty p max einh eit 1 spuri ous emis sions < 1 ghz - < -60 -57 dbm 2 spuri ous emis sions > 1 ghz - < -50 -47 dbm note s: (1 ) spi re gi st er 12 p r o g r am m ed t o 0xf f whi c h set s o u t put p o w e r t o maxi m u m. me a s u r e d at pi n exa nt f o r th e s m d p ad v e rsi on. (2 ) spi re gi st er 12 p r o g r am m ed t o 0xb c whi c h set s o u t put p o w e r t o no mi na l. me a s u r e d at pi n exa nt f o r th e s m d p ad v e rsi on.
classification einstufung product specific a t ion produktspezifikation no. ds-4555-24 00-102 rev. a subject thema modem for ieee802. 15.4 (zigbee) ?zigbee? mo dem? (ieee802.15.4) page seite 12 of 26 cust o me r?s code pan4555 pana s oni c ?s code enwc9a0 x xxef date datum 26.04.2007 high f r equency products di vision module business pana s oni c elect r onic devi ces europe gmbh approve d genehmigt chec ked geprft designe d erstellt 15. soldering temperature-t i me pr ofile (for reflow soldering) temperatur-zeit profil fr die reflowl?tung 15.1. for lead solder rec o m m e nde d te mp. profi l e for re flow s o ldering te m p . [ c ] ti me [s ] 235c m a x . 220 r 5 c 200 c 150 r 10 c 90 r 30s 10 r 1s 30 + 2 0/- 1 0s 15.2. for leadfree sol d er our us ed temp. profile for reflow s o ldering te mp .[c ] t i m e [s] 23 0 c - 2 5 0 c max . 22 0c 15 0 c ? 1 9 0 c 90 r 30 s 30 + 2 0 / - 10s reflow permissible cycle: 2 opposite sid e reflow is p r ohibited du e to module weight.
classification einstufung product specific a t ion produktspezifikation no. ds-4555-24 00-102 rev. a subject thema modem for ieee802. 15.4 (zigbee) ?zigbee? mo dem? (ieee802.15.4) page seite 13 of 26 cust o me r?s code pan4555 pana s oni c ?s code enwc9a0 x xxef date datum 26.04.2007 high f r equency products di vision module business pana s oni c elect r onic devi ces europe gmbh approve d genehmigt chec ked geprft designe d erstellt 16. module dimension modulabm essungen no. item punkt dimens io n abmessung t o lerance t o leranz remark bemerkung 1 w i d t h 1 2 . 2 0 r 0.20 2 l e n g h t 1 6 . 4 0 r 0.20 3 heig ht 2.20 r 0.20 with case 17. foot print of the module l?tpads vom modul a n t enna 18 19 20 22 23 24 21 10 11 12 14 15 16 17 2 13 4 6 7 8 9 5 t o p v i ew 26 27 28 29 30 31 32 25 13 5. 1 m m 0. 3 m m 6. 1 m m 6. 7 m m 7. 3 m m 7. 9 m m 16. 1 m m 1. 6 m m 2. 2 m m 2. 8 m m 3. 4 m m 11 . 9 m m 1 2 .2 m m 1 6 .4 m m p ad 1 = 4 x 1 . 0 m m x 1.3 m m p a d 2 = 2 8 x 0. 6m m x 1. 3m m all dimensio ns in mm. the outer dimensions h a s a toleran c e of r 0.2mm.
classification einstufung product specific a t ion produktspezifikation no. ds-4555-24 00-102 rev. a subject thema modem for ieee802. 15.4 (zigbee) ?zigbee? mo dem? (ieee802.15.4) page seite 14 of 26 cust o me r?s code pan4555 pana s oni c ?s code enwc9a0 x xxef date datum 26.04.2007 high f r equency products di vision module business pana s oni c elect r onic devi ces europe gmbh approve d genehmigt chec ked geprft designe d erstellt 18. labe ling drawing kennzeichnung des moduls durch label this label is suitable for r e flow soldering and designed for the enginee ring sample status. information in the 2d-barcode are th e d a t e c in the format year-month - day [6 signs], serial number [6 signs], orderin g number [8 signs; without enw and f], th e identifier f o r the hardware release [2 sign s, now 01] and the es, separated b y a semicolon. o d e es stands f o r engineering samples, please refer to cha p ter general information. a n t e nna 17 19 25 t o p vi ew 7. 5 mm 7. 5 m m 1 6 .4 mm 12 .2 m m in mass production stat us, the es will be elimi nated and replaced by a software i dentifier. and will be also implemented at the last informat ion in the 2 d -barcode. the point on the label is the identifier for pin 1 of t he module. 01 is the har dware revision. 19. mecha nical requirement s mechanisc he anforderungen no. item punkt limit grenz w e rte con d itio n bedi ngu ng 1 sold erab ilit y l?tf?hi gke i t more than 7 5 % of the solderi n g area sh all be coated b y s o ld er mehr als 7 5 % der l?tfl?c he s o ll mit l?tp a ste bedeckt sein. reflo w s o ld eri ng w i th recomme nda bl e temperatur e profil e 2 resistance to sold erin g he at it shall be satis f ied el ectrical r equ ireme n ts and not be mech an ical d a mag e pleas e refer to chapter 1 5 .2.
classification einstufung product specific a t ion produktspezifikation no. ds-4555-24 00-102 rev. a subject thema modem for ieee802. 15.4 (zigbee) ?zigbee? mo dem? (ieee802.15.4) page seite 15 of 26 cust o me r?s code pan4555 pana s oni c ?s code enwc9a0 x xxef date datum 26.04.2007 high f r equency products di vision module business pana s oni c elect r onic devi ces europe gmbh approve d genehmigt chec ked geprft designe d erstellt 20. recommended la nd pat te rn empfohlenes land pattern 14 15 16 13 12 11 10 28 27 an t e n n a 17 2 1 3 4 678 9 5 t o p v i ew 25 1 1 .7 m m 11. 1 m m p ad 1 = 4 x 1. 1m m x 1 . 4m m p ad 2 = 28 x 0. 7m m x 1. 4m m w hen usi ng t he cer a m i c ant enna, t h i s m i ni m u m ar ea i s r e st r i ced, m eans no gr ound, no l i ne and i n gener al no m e t a l , e. g. scr ew s. 5. 0 m m 5. 0 m m 7. 0 m m i n com par i s on t o t he m odul e, w e r e com m e n d t o use 50 m bi gger pad si ze t o each di r e ct i on! 24 23 22 20 19 18 21 26 29 30 31 32 dimensions in mm. the land pat tern dimensions above can serve as a guidance, but this infor m ation is given without any legal respon sibility. for your footprint, we recommend to use 50m b i gger size fo r the pads at each direct ion in comparison to the module footprint, p l ease refer t o chapter 17 . foot print of the module. for the sold er paste scr een please use the same as for the module, but slight dif f ere n t measures and shapes o f the solder paste scr ee n cutouts might be optimum depending on your soldering pr ocess, for e x ample on t he chosen solder paste screen thickness. the solder screen thickness de pends on your productio n standard, we recommend 120m t o 150m. im po r t ant: the bottom side of pan4555 is fully coated, nevertheless no copper, such as through hole vias, planes or tra cks on your board component layer should be lo cated below pan4555 in order to avoid short cuts. in ca ses where a track or thro ugh hole via has to be lo cated under the module it has to be kept away from pan4555 bottom pads. the pn4555 multilayer pcb conta i ns an inner rf shielding plane , therefore no pcb shie lding plane below the mod u le is neede d. when using the antenna pad version and if your application allows, please place the an tenna on the edge of your carrier board. if you have any questions on these points, we a r e open to discuss your individual sit uation.
classification einstufung product specific a t ion produktspezifikation no. ds-4555-24 00-102 rev. a subject thema modem for ieee802. 15.4 (zigbee) ?zigbee? mo dem? (ieee802.15.4) page seite 16 of 26 cust o me r?s code pan4555 pana s oni c ?s code enwc9a0 x xxef date datum 26.04.2007 high f r equency products di vision module business pana s oni c elect r onic devi ces europe gmbh approve d genehmigt chec ked geprft designe d erstellt 21. development of applicati o ns with freescale beest ack tm entwiclung von applik ationen mit hilfe des beestacks von freescale this chapter are copied f r om [8], please refer to t h is docume n t to get more information. pan4555 is built around the mc1321 4 single pa ckage from freescale in c. which inclu des the freescale zigbee codebase beestack tm (downscaled versio ns of pan4555 with mc1321x suited for ieee802 .15.4 or smac only are available on demand as well). the access to beestack tm is provided after regist ration and lo gin at www.freescale.co m /zigbee . after login t he beekit d ownl oadpackage.zi p can be downloaded. this package contains beestack tm , ieee802.15.4 mac an d smac codebases. fo r pan4555 phy testing using testtool tm t he download of the late st 1321xevk package is recommen ded. after successful inst allation of beekit on a pc open beekit. a zigbee sample solutio n *.bksln can be creat ed in a few steps. important: before a solution may b e exported for pan4555 the mc132 1x target settings have to be chang ed via the ?user define d target edit o r?. the required chang es are: x unch eck th e ?u se exte r nal an ten n a swit ch ? x adju st t he p o rt se tt in gs depe nd in g on yo ur app lica tion, t he pan455 5 d a ta sh eet an d f o r use of the pan4 555 carr ier boar d the p i n list in cha p ter pan4 5 55 p i nlis t at [8] . for importing, compiling and debugg ing of the b eekit tm solution the inte grated deve lopment environmen t (ide) metrowerks tm codewarrior from www.m e trowerks.co m is required. as device fl ash progra mmer the usb hcs08/hcs12 multilink from www.pemicro. c om is recommend ed. important: pan4555 is a single rf port design with mc132 14, refer also to an3248. the freescale reference boards 13 213-ncb an d 13213-srb are dual port designs, software for these board s will not run . the shippin g of product s which use zigbee tm technology requires a membership of the zigbee tm alliance ( www.zigbee.org ), at least as a n adopter member, and is mandatory for the zigbee tm product certif ication proce dure and use of the zig b ee tm logo. the prices a nd fees as known from t oday are as follows: x ide codewarrior order num ber cws-h08-c 6 4k-cx from www.metrowerks.com : us$ 9 95, -. x usb hcs0 8 /hcs12 mult ilink (ww w .pemicr o . c om), o r de ra ble a t www. f r ee scale. co m/zigbe e with th e id usbmulti linkbdm: us$ 9 9 ,- x beest a ck tm : the sup por t f ee af ter a 30 days pe riod fre e o f charg e r e q u ir ed by fr ee sca l e inc. is us$ 999 ,-.
classification einstufung product specific a t ion produktspezifikation no. ds-4555-24 00-102 rev. a subject thema modem for ieee802. 15.4 (zigbee) ?zigbee? mo dem? (ieee802.15.4) page seite 17 of 26 cust o me r?s code pan4555 pana s oni c ?s code enwc9a0 x xxef date datum 26.04.2007 high f r equency products di vision module business pana s oni c elect r onic devi ces europe gmbh approve d genehmigt chec ked geprft designe d erstellt x compan ie s se llin g p r od uct s u s ing z i gbe e tm te chno logy hav e t o b e a member of th e zigb ee tm alliance ( www.zigbee.org ) . t he m i nim u m fe e p e r year f o r a m e mber sh ip as adop te r is u s $ 3 500 ,-. x for ad opt er members th e f ee for list i ng the f i r s t prod uct at ( www.zigbee.org ) is us$ 10 00, - . x the cost o f a z i gb ee tm prod uct ce rt if icat ion a t a te st ho use (tv rh einland) ra ng es from appr oximat ely us$ 4 0 0 0 ,- to us$ 8 000 ,-, de pe nding on th e imp l eme n t ed so ftwa r e. 22. reliabili ty test s zuverl?ssigkeitstests the measurement should be done af ter exposed to room temperature and humidity for 1hour. die messungen sollten erst nach einer stunde lagerung unter normalen bedingungen erfolge n . no. item punkt limit grenz w e rte con d itio n bedi ngu ng 1 v i b r a t i o n t e s t electrical para m eter shou ld b e in spec ificatio n a) f r eq.:10~ 50 hz,amplitu de:1 . 5mm a) 20mi n . / cy c l e,1hrs. each of xyz axis b) f r eq.:30~ 10 0hz, 6g b) 20mi n . / cy c l e,1hrs. each of xyz axis 2 shock test the same as th e abov e drop ped o n to hard w o od fro m heig h t of 50 cm for 3 times 3 heat c y c l e test the same as th e abov e -40c for 30m i n . and + 85c for 30mi n .; each temp erat ure 30 0 c y c l es 4 moisture test the same as th e abov e + 60c, 90% r h , 300h 5 lo w temp. test the same as th e abov e -40c, 30 0h 6 high tem p . test the same as th e abov e + 85c, 300 h 23. cautions warnungen failure to do so may result in degrad ing of the pr oduct?s fun c tions and da mage to the product. 23.1. notes of design designhinweise (1 ) pl e a s e fo ll ow t h e c o nd iti o n wri t te n in th is s p e c i f i c a t i o n, e s pe ci al l y t h e co n t ro l signa ls o f th is modu le . (2) this pro d u c t sho u ld n o t be str e ssed when in stalled. (3) heat is the major cau s e of shor ten i ng the lif e o f th ese p r od uct s . p l ea se ke ep th is prod uct awa y from hea t. avoid a s se mbly an d use o f t he ta rg et equ ipme nt in cond it ions wh ere t h e prod uct s ' te mperat ure may exce ed th e maximu m allowa ble . (4) the supp ly volta g e sho u ld no t be e x ceed in g or rever s e, a n d sho u ld n o t ca rry noise a nd spike. (5) plea se kee p t h is pro d u c t away fro m oth e r hig h fr eq uen cy cir c u i t s .
classification einstufung product specific a t ion produktspezifikation no. ds-4555-24 00-102 rev. a subject thema modem for ieee802. 15.4 (zigbee) ?zigbee? mo dem? (ieee802.15.4) page seite 18 of 26 cust o me r?s code pan4555 pana s oni c ?s code enwc9a0 x xxef date datum 26.04.2007 high f r equency products di vision module business pana s oni c elect r onic devi ces europe gmbh approve d genehmigt chec ked geprft designe d erstellt 23.2. notes of installation verarbeitungshinweis e (1) reflow so ld ering is p o ssible f o r twice on th e co ndition in ch apt er 15. plea se set up the temp erat ure a t t h e solder in g port i o n of th is pr odu c t a c cord in g to th is re flo w pro f ile . (2) caref u lly p o s ition th e p r odu ct s so th at the i r he at will no t b u r n int o p r inte d cir c u i t boar ds o r a f fect the o t h e r compo n e n ts t hat ar e su scep tible to hea t. (3) caref u lly lo cat e the s e p r odu ct s so t hat th eir t e mperat ure s will not incr ease due to the ef fe ct s o f hea t ge nera t e d by neighb or ing comp on ent s . (4) if a vinyl- co vered w i r e comes in to cont act w i th t he pro d u c t s , t hen th e cover w i ll melt an d g e nera t e tox i c gas, damag ing the insulation . neve r allow con t a c t betwe en th e cove r and t hese pro d u c t s to occu r. (5) this pro d u c t sho u ld n o t be str e ssed or vibra t e d when re flow ed. (6) plea se kee p t he fo llowing co nd it ion s wh en you in sta l l t h is p r odu c t f o r re para t ion by ha nd so lder ing . (7 ) pl e a s e do no t wash th is p r od uc t. (8) plea se r e fe r to th e r e co mmended p a tt ern whe n de sign in g a bo ard . (9) pressing o n par ts o f t h e meta l cove r or fa st en in g o b je cts to the meta l co ver is not a llow e d . 23.3. notes of usage conditions benutzerhinweis e (1) plea se t a ke measure a gainst st at ic electr icity. if pu lses or oth e r tra n sient load s (a la rge loa d app l ied in a sho r t time ) are ap plie d to the pr odu ct s, th en be f o re use, ch eck a n d eva l ua te th eir o p era t ion wh en assemb led on yo ur pro ducts. (2) plea se d o n o t use t h e f a llen pr od uct. (3) plea se d o n o t put on d a m age and d i rt to t he pin , and do n' t tou c h th e elect r ic c o mp on en ts. (4 ) pl e a s e fo ll ow t h e c o nd iti o n wri t te n in th e ra ti ngs , ab o u t t h e po we r su pp l y in str u ment s app lied to th is pr odu ct. (5) ele c tr od e p eelin g str e n g th : do no t add pr essu r e o f mor e t h an 4.9n wh en s o l d ere d on pcb (6) pressing o n par ts o f t h e meta l cove r or fa st en in g o b je cts to the meta l co ver is not a llow e d . (7) the s e pr od uct s ar e int e nded f o r ge nera l pur po se an d sta n dard u s e in gene ra l ele c t r on ic e quipment , such a s hom e a ppl ia n c e s , of fice eq u i pmen t, info rmation and communicat i o n equ ipmen t.
classification einstufung product specific a t ion produktspezifikation no. ds-4555-24 00-102 rev. a subject thema modem for ieee802. 15.4 (zigbee) ?zigbee? mo dem? (ieee802.15.4) page seite 19 of 26 cust o me r?s code pan4555 pana s oni c ?s code enwc9a0 x xxef date datum 26.04.2007 high f r equency products di vision module business pana s oni c elect r onic devi ces europe gmbh approve d genehmigt chec ked geprft designe d erstellt 23.4. notes of storage lagerhinweise (1) the mo du le may no t b e st re ssed mech an ically dur i ng sto r a g e. (2) do no t st ore th ese p r od uct s in t he f o llowing co ndition s or t he per f orma nce cha r a c t e rist ics o f t he pr odu ct , su ch as r f per fo rmance w i ll be adver se ly aff e cted : x stora g e in salty air o r in an envir on ment w i th a hig h co ncen trat io n of co rro sive gas, su ch a s c l 2, h2s , nh3, so2 , or nox x st o r ag e in di rec t su nl ig ht x stora g e in a n e n viro nment whe r e t he tempe r at ure may be out s ide th e rang e of 5c t o 3 5 c ran g e , o r w here t he hu midity may be out s ide t he 45 to 85 % ra ng e. x stora g e of t he pro d u c t s for mor e t h an one year af ter th e da te of de live r y at yo ur c o mp an y if a l l th e a b o v e co nd it io ns (1 ) to (3 ) ha ve be e n a v o i de d (3) stora g e pe riod: plea se che c k the a dhe sive str e ngt h o f t h e embosse d t ape an d so lde r ing af t e r 6 mon t h s of stor age . (4) plea se kee p t h is pro d u c t away fro m water , po ison ou s ga s and corr osive g a s. (5) this pro d u c t sho u ld n o t be str e ssed or sho c ke d when tr an sp orte d. (6 ) pl e a s e fo ll ow t h e s p eci f i c a t i o n wh en pi li ng up th e p a c k e d cra t e ( ma x. 1 0 ) . 23.5. cautions for safety sicherheitshinweise these specifications are intended to preserve the quality assu rance of pro ducts as individual co mponents. before use, check and e v aluate their operation when mounted on your products. abid e by these specifications, with out deviation when usin g the products.these pro ducts may short- circuit. i f ele c trical shocks, smoke, fir e , and/or accidents involving human life are anticipated when a short circuit occu rs, then at le ast, provide the following failsafe functions, a s a minimum. (1) ensu re th e saf e ty of th e who l e syst em by insta l ling a p r o t e c tio n circuit a nd a prot ection d e vice. (2) ensu re th e saf e ty of th e who l e syst em by insta l ling a r e d u n dan t cir c uit or ano the r syst em to pr eve n t a sing le f ault ca usin g an un sa fe stat us. 23.6. other cautions weitere hinweis e (1) this sp ecif icat io n sh eet is copyr i g h t ed. plea se do not op en it t o t h e th ir d p a rty. (2 ) pl e a s e do no t u s e th is pro d u c t of our co mp a n y fo r an ot h e r pu rp os e. (3) be sur e t o p r ovid e a n a ppro p r i at e f a il- s af e f u n c tio n on yo ur pro d u c t to preven t a se con d dam age th at ma y be ca used by t he ab n o rmal fu nction or the f a ilur e o f our pro d u c t . (4) this pro d u c t h a s no t be en ma nuf acture d w i t h a n y ozon e ch emical cont r o lled unde r the montr e a l p r ot oco l . (5) the s e pr od uct s ar e n o t in te nde d f o r ot her u s e s , o t he r t h a n unde r the specia l con d ition s shown be low . be for e u s ing the s e pr odu ct s und e r such sp ecial con d ition s , che c k the i r perf o rman ce a nd re liab ility un der t h e said sp ecial
classification einstufung product specific a t ion produktspezifikation no. ds-4555-24 00-102 rev. a subject thema modem for ieee802. 15.4 (zigbee) ?zigbee? mo dem? (ieee802.15.4) page seite 20 of 26 cust o me r?s code pan4555 pana s oni c ?s code enwc9a0 x xxef date datum 26.04.2007 high f r equency products di vision module business pana s oni c elect r onic devi ces europe gmbh approve d genehmigt chec ked geprft designe d erstellt c o nd it io ns ca re fu ll y to de t e rmi n e whe t he r o r n o t t h e y c a n be u s ed i n su ch a manner . x in liqu id, su ch as wa ter , sa lt wa ter , oil, alka li, or org a n i c solvent, or in p l ace s where liquid may splash. x in dir e ct su n l ight , out doo rs, or in a d u sty env iro n m ent x in an enviro n ment whe r e con den sa t i on o c cur s . x in an enviro n ment wit h a h i gh con c entr a t i o n o f harmfu l ga s (e. g . salty a i r, hcl, c l 2, so2, h2s, n h 3, and nox) (6) if an abn or mal vo lta g e is ap plie d d ue to a p r ob lem o c cur r in g in oth e r compo n e n t s or cir c u i t s , r eplace the s e pr od ucts with new pr odu ct s be ca use t h ey may not be able to prov ide norma l p e rfo r man c e even if th eir ele c t r on ic cha r a c t e rist ics an d app e a ran c e s ap pear sat i sfa c to ry. (7 ) w h e n yo u ha ve an y q ues ti o n o r un ce rt ai nt y , b o t h o f you a n d pan a s o nic sincere l y co pe w i th it.
classification einstufung product specific a t ion produktspezifikation no. ds-4555-24 00-102 rev. a subject thema modem for ieee802. 15.4 (zigbee) ?zigbee? mo dem? (ieee802.15.4) page seite 21 of 26 cust o me r?s code pan4555 pana s oni c ?s code enwc9a0 x xxef date datum 26.04.2007 high f r equency products di vision module business pana s oni c elect r onic devi ces europe gmbh approve d genehmigt chec ked geprft designe d erstellt 24. packaging verpackung 24.1. tape dimension 1. 5 5 0. 0 5 do 4. 0 0. 1( i i ) po w 2. 0 0. 1 ( i ) p2 1. 75 0. 1 e1 1. 5 mi n d1 f ( iii ) ao 8. 0 re f 8. 8 re f 1. 9 re f p1 y y xx r0 . 5 ty p i c a l 0. 3 0 0. 05 t ko k1 bo se c t i o n y - y se c t i o n x - x m e a s ur e d f r om c e n t r e l i n e o f s p r o c k et h o le to c e n t r e l i n e o f p o c k e t . c u m u l a t i ve t o l e r a n c e o f 1 0 sp r o ck e t h o le s is 0 . 2 0 . m e a s ur e d f r om c e n t r e l i n e o f s p r o c k et ho l e t o c e nt r e l i n e of p o c k et . (i ) (i i ) (i i i ) ( i v ) o t h e r m a t e r i a l a v ai l a bl e. a l l di m e n s i o ns i n m i l l i m e t re s u n l e s s o t he r w i s e s t a t e d . w f p 1 +/ - 0 . 1 +/ - 0 . 1 +/ - 0 . 3 11 . 5 0 20 . 0 0 24 . 0 0 +/ - 0 . 1 3. 4 0 ao 1 2 .6 0 + /- 0 . 1 ko bo 1 6 .8 0 + /- 0 . 1 e s ti m a te d m a x . l e n g th : 6 0 m e te r / 2 2 b 3 r e e l f o r m i n g f o r m at : f l a t be d k 2. 6 0 1 +/ - 0 . 1 this package will be available lat e st as t he mass production status are confirmed. 24.2. packing in tape d i r e ct i on of unr eel i ng ( f or cust om er ) tr a i l e r (e m p ty ) 1 x c i r c umf e r e n c e / hub ( m i n . 160m m) c o mponent pac k e d ar ea . s t andar d 15 00pc s t op c o v e r t ape mor e t han 1 x c i r c umf e r enc e pl us 100 mm t o av oi d f i x i ng of t ape end on s eal ed modul es . l ead er ( e mp t y ) mi ni mum 10 pi c h empt y hollow in component packed area shall b e less than t w o per reel and those h o llows shall not be consecut ive. top cover tape shall not be found on reel holes a nd shall not stick ou t fro m reel.
classification einstufung product specific a t ion produktspezifikation no. ds-4555-24 00-102 rev. a subject thema modem for ieee802. 15.4 (zigbee) ?zigbee? mo dem? (ieee802.15.4) page seite 22 of 26 cust o me r?s code pan4555 pana s oni c ?s code enwc9a0 x xxef date datum 26.04.2007 high f r equency products di vision module business pana s oni c elect r onic devi ces europe gmbh approve d genehmigt chec ked geprft designe d erstellt 24.3. component dire ction komponent enanordnung pi n 1 ma r k i n g d i r e c t i o n of un r e el i n g ( f o r cu st o m e r ) please refer also to cha p ter 18. lab eling drawing this packag e will be available late st as t he mass production status are confirmed. 24.4. reel dim e nsion a b d n w 2 max m i n mi n 1 . 0 max 13 +0. 5 25 .0 +2. 0 24 . 4 +3 . 0 -0 . 2 -0 .0 -0 .5 *l at c h ( 2 p c ) a l l dim e n s i o n s in m i ll im e t e r s u n le ss o t h e r w ise s t a t e d as s e m b ly method 24mm 3 3 0 . 0 1 . 5 2 0. 2 1 00. 0 3 0. 4 * l a tc h tape s i ze c w 1 w 3
classification einstufung product specific a t ion produktspezifikation no. ds-4555-24 00-102 rev. a subject thema modem for ieee802. 15.4 (zigbee) ?zigbee? mo dem? (ieee802.15.4) page seite 23 of 26 cust o me r?s code pan4555 pana s oni c ?s code enwc9a0 x xxef date datum 26.04.2007 high f r equency products di vision module business pana s oni c elect r onic devi ces europe gmbh approve d genehmigt chec ked geprft designe d erstellt 24.5. label for package 70, 0 0 m m 42, 3 0 m m (p )p / n p a n 4 555 ( 1 p) po n o . e n w c 9a 08 a 3 ef descr i p t i on es sa m p l e es st a t u s (q )q t y 500 ms l t b d tm a x t b d (d )d a t e c o d e 741 9 [[g ]] ma d e i n ge r m a n y the label must be stick 3 times, reel, barrier bag and inner carton box. 24.6. total packing handling bar c o d e la b e l m o i s t u re -s e n s i t i v e p r i n t ( a l r ea dy e x i s t on ba r r i e r b a g ) ba r c o d e la b e l de s i c c an t 1) 2) m o i s tu r e i n d i c a to r bar r i er ba g se a l e d i n n e r c a r t on box s i ze 3 4 0 x 3 4 0 x 4 1 m m 3 1) qua nt i t y o f de s i c c ant ac c o r d i n g to c a l c u l a t i o n 2) opt i o n a l : d e s i c c a nt p l ac ed i n t o t he c o r ner of t he bar r i e r ba g
classification einstufung product specific a t ion produktspezifikation no. ds-4555-24 00-102 rev. a subject thema modem for ieee802. 15.4 (zigbee) ?zigbee? mo dem? (ieee802.15.4) page seite 24 of 26 cust o me r?s code pan4555 pana s oni c ?s code enwc9a0 x xxef date datum 26.04.2007 high f r equency products di vision module business pana s oni c elect r onic devi ces europe gmbh approve d genehmigt chec ked geprft designe d erstellt 24.7. cover tape reel strengt h for c e dir e ct ion speed = 300m m / m i n. cov e r t ape r eel st r eng t h =0. 098~0. 68n ( 10~70g ) = 10deg 25. ordering information bestellinformationen orderin g part n u mber descripti on moq (1 ) enwcza0 8 a 3ef (2 ) engi neer in g sampl e z i gbee r ead y pan45 55, 2.4 g hz z i gbee re ad y w i th c e ra mic antenn a 60kbit f l ash m e mor y 1 enwcza0 9 n 4ef (2 ) engi neer in g sampl e z i gbee r ead y pan45 55, 2.4 g hz z i gbee re ad y w i th rf ou t on a smd pa d 60kbit f l ash m e mor y 1 enwc9a08a3ef (3 ) mass producti on samp le z i g b ee rea d y pan45 55, 2.4 g hz z i gbee re ad y w i th c e ra mic antenn a 60kbit f l ash m e mor y 150 0 (4 ) enwc9a09n4ef (3 ) mass producti on samp le z i g b ee rea d y pan45 55, 2.4 g hz z i gbee re ad y w i th rf ou t on a smd pa d 60kbit f l ash m e mor y 150 0 (4 ) note: ( 1 ) minimu m orde r qu an tity. (2 ) th e ?z ? i n t h e o r de rin g pa rt nu mb e r , re fe rs to t h e e n g i n e e r i ng sa mpl e st atu s . afte r m a ss prod u c ti o n the ?z ? will be changed to the ?9?. ( 3 ) co uld on ly be ord e red , if we re leas ed th e mass prod uc tion s t a t us . if we fi ni shi n g, thi s docum ent will change f r om pr e l imi n a r y to re leas e al so the rev i si on stat us w i ll mo ve fr om a l ph abe tic n u mber ing to 1 . 0 . ( 4 ) o n spec ia l ag ree m en t w e ca n a l so d e live r in lower qu an tity!
classification einstufung product specific a t ion produktspezifikation no. ds-4555-24 00-102 rev. a subject thema modem for ieee802. 15.4 (zigbee) ?zigbee? mo dem? (ieee802.15.4) page seite 25 of 26 cust o me r?s code pan4555 pana s oni c ?s code enwc9a0 x xxef date datum 26.04.2007 high f r equency products di vision module business pana s oni c elect r onic devi ces europe gmbh approve d genehmigt chec ked geprft designe d erstellt 26. rohs de claration rohs-erkl?rung declaration of environmental compatibility for su pplied produ cts: hereby we declare to o u r best present knowled ge based on declaration of our suppliers that this product do n o t contain b y now the fo llowing substances which are banned by directive 2002/95/ec (rohs) or if contain a maximu m concentration of 0,1% by we ight in homogeneous materials for ? ? ? ? ? ?
classification einstufung product specification produktspezifikation no. ds-4555-2400-102 rev. a subject thema modem for ieee802.15.4 (zigbee) ?zigbee? modem? (ieee802.15.4) page seite 26 of 26 customer?s code pan4555 panasonic?s code ENWC9A0XXXEF date datum 26.04.2007 high frequency products division module business panasonic electronic devices europe gmbh approved genehmigt checked geprft designed erstellt [6] 802154ebrm.pdf 802.15.4 / zigbee embedded bootloader reference manual rev. 0.0 09/2004 [7] an2771 zigbee/802.15.4 phy protocol test client (ptc) rev. 0.0 freescale semiconductor [8] manual to the evaluation kit from panasonic downloadable under: www.pedeu.panasonic.de 29. general information allgemeine informationen ? panasonic electronic devices europe gmbh 2007. all rights reserved. this product description does not lodge the claim to be complete and free of mistakes. please contact the related product manager in every case. if we deliver samples to the customer, these samples have the status engineering samples. this means, the design of this product is not yet concluded. engineering samples may be partially or fully functional, and there may be differences to be published data sheet. engineering samples are not qualified and are not to be used for reliability testing or series production. disclaimer: customer acknowledges that samples may deviate from the data sheet and may bear defects due to their status of development and the lack of qualification mentioned above. panasonic electronic devices europe gmbh rejects any liability or product warranty for engineering samples. in particular, panasonic electronic devices europe gmbh disclaims liability for damages caused by x the use of the engineering sample other than for evaluation purposes, particularly the installation or integration in an other product to be sold by customer, x deviation or lapse in function of engineering sample, x improper use of engineering samples. panasonic electronic devices europe gmbh di sclaimes any liability for consequential and incidental damages. in case of any questions, please contact your local sales partner or the related product manager. 30. life support policy politik fr lebenserhaltungssysteme this panasonic electronic devices europe gmbh product is not designed for use in life support appliances, devices, or systems where malfunction can reasonably be expected to result in a significant personal injury to the user, or as a critical component in any life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify panasonic electronic devices europe gmbh for any damages resulting.

▲Up To Search▲

Price & Availability of ENWC9A0XXXEF

	To Download ENWC9A0XXXEF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .